UBS 1300(R-RP)

WIDE BELT SANDER

DOWNLOAD BROCHURE

WATCH PRODUCT VIDEO

PRODUCT INFORMATION DESCRIBED BELOW ↓

UPDATE YOUR PHRASE

INDUSTRIAL HEAVY DUTY SOLUTION FOR FURNITURE FACTORY

UMABOY has designed this wide belt sander to to achieve smooth, spotless surfaces with the proper thickness. Simple to use for finishing tasks on MDF, plywood, and hardwood.

R-RP SYSTEM !

Update soon

PRESSURE UNITS

Pressure units to hold the work pieces on the conveyor belt; are positioned in front and rear of each working unit;the press rollers with springs to compensate panel thickness difference.
Pessure units are exposed on both ends, easy to adjust.

FEED SYSTEM

Feed table is built in granite with tolerance of planarity within 0.05 mm; table surface fine-grinded to avoid wear of the internal side of the feed belt; the granite feed tale is never distortion
Conveyor belt with surface in rubber at appropriate hardness; top profile according to operation requirement.Drive unit with motor and reducer, feed speed variable in continuous from 7 m/min to 30 m/min.
Feed table extension in machine front side with steel idle rollers..

1ST WORKING UNIT

Working unit with diameter 240 mm steel standing roller complete with ; sending belt tension unit; electronic oscillation; dust hood; safety system.
sanding rollers with helicoidal grooves for cooling. Motor with one speed of rotation.

2ND WORKING UNIT

Working unit is a combination of rubber roller and pad, with alloy rack, belt, graphite cloth complete with sanding belt tension unit; electronic oscillation; dust hood; safety systems.
Rubber roller is diameter 210 mm and hardness 85 shore. sanding pad can be adjusted up and down easily. motor with one speed of rotation. (Air pad is available )

OPTIONAL DEVICE

Air jet blower for sanding belt cleaning.
Italy cigo conveyor belt.
Vacuum feed tale.
Customer other’s request according to fact.

TECHNICAL SPECIFICATION

Wide belt sander
UBS 1300(R-RP)

Wide belt sander

Technical Specifications

Model	UBS 1300 (R-RP)
Contact roller diameter	240 mm
Calibrating roller diameter	210 mm
Working width	40-1300 mm
Working thicknes	2.5-150 mm
Feeding speed	7-30 m/min
First belt speed	24 m/s
Second belt speed	18 m/s
Sanding belt size	1330x2200 mm
Total power	39.82 kw
First belt motor	22 kw
Second belt motor	15 kw
Motor position	Inside
Feeding motor	2.2 kw
Lift & decline motor	0.37 kw
Brush motor	0.25 kw
Working pressure	0.4 - 0.8 mpa
Compressed air consumption	1.5 CBM/min
Overall Dimension	2300 x 2000 x 2120 mm

Note: Technical specifications may be changed without any prior notice. Product images are just for the reference.

Let's talk !

Please fill out this form and relax.
Our expert executive team will reach out to you and
offer the most suitable advice according to your needs.

Please contact we would like to help you.