UEB 640 PCGD

AUTOMATIC EDGEBANDING MACHINE

WATCH PRODUCT VIDEO

PRODUCT INFORMATION DESCRIBED BELOW ↓

SEAMLESS EDGEBANDING MACHINE

SMART SOLUTION FOR ENHANCE QUALITY

The machine can be performing with many different Edgebands such as PVC, ABS, veneer and acrylic On different types of boards such as plywood, chipboard, MDF/HDF..

PREMILLING UNIT

Apply the hot melt glue on the panel, Pneumatic cutting of pvc edge banding as per the length of panel, gluing on entire surface of panel height.
Teflon coated gluepot to prevent wastage of glue. It works wonders for clearing away burnt glue. Gluepot with a 2 kilogram capacity and a 1.5 kw plate heating.
Having a nurling roller with a 500 watt heating element ensures uniformity of glue on panel edge.
The high quality superior wiper controlled the flow of glue.
These features are specially designed to ensure a consistently precise finish and superior quality and to avoid any poor quality and Inconsistency of glue.

GLUE UNIT

Apply the hot melt glue on the panel, Pneumatic cutting of pvc edge banding as per the length of panel, gluing on entire surface of panel height.
Teflon coated gluepot to prevent wastage of glue. It works wonders for clearing away burnt glue. Gluepot with a 2 kilogram capacity and a 1.5 kw plate heating.
Having a nurling roller with a 500 watt heating element ensures uniformity of glue on panel edge.
The high quality superior wiper controlled the flow of glue.
These features are specially designed to ensure a consistently precise finish and superior quality and to avoid any poor quality and Inconsistency of glue.

PRESSURE ROLLER GROUP

A pressure roller group consists of 4 pressure roller. The first pressure roller diameter is 150 mm and the remaining 3 pressure roller diameters are 100 mm
All 4 pressure roller pneumatically operated. pressure can be adjustable by pnumatic pressure Nobe. function of pneumatic cylinder operated by PLC.
The pressure rollers apply sufficient force to the panel to ensure that the glue adheres correctly and in the desired amount.
It offers incredible results with a smooth finish and a long-lasting edge attached to the panel.

END CUTTING

Unit used to cut excess pvc from both the end of panel. Equipped with high frequency motors with a power of 0.55 kW and 12,000 rpm and saw blades with a diameter of 150 mm.
High reliability and precision as Installed large linear guides. 2 saw blades diam. 104 x 3.0 x 22 mm, T = 30.
This process ensures a precise edge finish for a perfect finished look.

ROUGH TOP/BOTTOM TRIMMING

Perform Initial trimming of the top and bottom edges of the glued edge.
Top and bottom flat triming can be performed with this unit.
suitable for acralyc edgebanding,
Comes with 2 high end frequency motors with suction hood and front and vertical Guide Plate
Motors manually tiltable between 2 working positions: Flush and radius trimming.
All spindles equipped with encoder readouts for fast adjustment
High Frequency spindle motor – 0.55 kw x 2 , 12000 RPM

FINE TOP/BOTTOM TRIMMING

Performs fine trimming of the top and bottom edges of the pvc edge.
Comes with 2 highend frequency motors with suction hood and vertical Guide Plate.
Motors manually tiltable between 2 working positions: Flat and radius trimming.
Easy adjustments of trimming head as per thickness of pvc.
High Frequency spindle motor – 0.55 kw x 2, 12000 RPM.

CORNER ROUNDING

corner rounding unit for front and rear edges for perfect corner trimming.
This unit works in different profile in prosessed post forming machine like half nose, full nose, and duck nose.
having a capacity of 50 mm panel.
High Frequency spindle motor – 0.55 kw x 2, 12000 RPM.
Workpiece length min – 150 mm, edgebanding thickness upto 0.4 mm to 3mm.
Thanks to it’s movement of circulating over the edge of panel with the help of linear guide ways and pneumatic cylinder gives the best result in the corner of panel.

PVC SCRAPPING UNIT

PVC Scrapping to remove excess pvc from top and bottom edge.
Comes with standard profile of 2 mm.
It provides better edge, consistency, precision and smoothness..
Includes 2 R-profile blades with suction hood and front and vertical guide plate..

GLUE SCRAPPING

The glue scraper helps remove excess adhesive from the joint surface of the panel and edgeband.
Flat blade knife with copying plate and air cleaning function
This process ensures that there is no glue on the panel or outside the application area,.

GROOVING UNIT

In built grooving function in machine gives easy working for make a groove on board
One can use maximum 9 mm grooving cutter.
This function is PLC controlled, so its very easy to operate.
Useful for backpanel application in furniture.

LIQUID SPRAYING UNIT

Spraying anti adhesive liquid on panel before buffing unit give the clean finished surface.
Equipped with PLC controlled pneumatic flow.
This process cleans the entire treated area to make it look rich and well-groomed..

BUFFING UNIT

Edge banding machine buff wheels are used to polish and buff the edges of the top/bottom wood panels to create a smooth and glossy finish.
Finishing the edge looks dimensional and attractive with this process.

TECHNICAL SPECIFICATION

High Speed Auto Edge Bander UEB-640 PCGD

Heavy Duty Machine For Large Scale Production

Salient Features

High and machining performance High Speed Processing with user friendly and trouble free operation
Smart Touch PLC System integrated with encoder controlled every functions of the machines which gives accurate functioning
Motorised up-down of conveyer belt
Equipped with Diamond pre milling Cutter
Teflon coated glue pot easy for cleaning, 2.5 kg capacity of EVA glue
Safety air tank for constant supply of air to machine

Technical Specifications

Model	UEB-640 PCGD
Electric Level	415-220/50 hz
Edge Material Thickness	0.4-3 mm
Panel Thickness	10-50 mm
Minimum Width of The Panel	60 mm
Maximum Leangth of The Panel	130 mm
Converyer Speed	18 m/min
Conveyer Thickness Adjustment	Electric
Conveyer Up/Down	0.37 kw
Total Electric Power	16 kw
Total Air Pressure	6-8 bars
Pre-milling Motor Power	2 x 1.5 kw
End Cutting Unit Power	2 x 0.55 kw
Top/bottom Fine-triming Unit Power	2 x 0.55 kw
Top/bottom Rough-triming Unit Power	2 x 0.55 kw
Corner Rounding Unit Power	2 x 0.3 kw
Grooving Unit Motor Power	4 Kw
Max. Depth of Grooving	17+9 mm blade
Buffing Unit Power	2 x 0.37 kw
Overall Size (L X H X W)	7300 X 1650 X 1000