UEB 990 PUR

AUTOMATIC EDGEBANDING MACHINE​

DOWNLOAD BROCHURE

WATCH PRODUCT VIDEO

PRODUCT INFORMATION DESCRIBED BELOW ↓

SEAMLESS EDGEBANDING MACHINE

SMART SOLUTION FOR ENHANCE QUALITY​

PRE LIQUID SPRAYING

  • Spraying anti adhesive liquid on panel will restrict the glue on top and bottom surface of panel.
  • Equipped with PLC controlled pneumatic flow.

PREMILLING UNIT

  • An automatic length sensor switch is installed, which allows accurate determination of panel length and processing of the entire panel.
  • corrects the panel’s surface using premium auto-set High RPM Spindle frequency motors ( revolves both counter-clockwise and clockwise to provide a precise, chip-free finish.
  • Equipped with a 1.5 KW spindle motor-powered, 12000 RPM diamond cutter head.
  • The maximum board thickness for premilling is 50 mm, and the maximum cutting depth is between 0.2 to 2 mm
  • There is a partition and an air blower installed between the Premilling Unit and the Glue Unit. The air blower removes dust particles for a quality and smoother gluing process
  • the priming procedure creates a consistent surface and chip-free edge for the panel.

HEATING LAMP

  • This function is used to remove moisture from the edge of thw panel.
  • Help to get perfect bonding during edge banding 
Heating Lamp

GLUE UNIT ( 1st gluepot )

  • Apply the hot melt glue on the panel, Pneumatic cutting of pvc edge banding as per the length of panel, gluing on entire surface of panel height.
  • Teflon coated gluepot to prevent wastage of glue. It works wonders for clearing away burnt glue. Gluepot with a 2 kilogram capacity and a 1.5 kw plate heating.
  • Having a nurling roller with a 500 watt heating element ensures uniformity of glue on panel edge.
  • The high quality superior wiper controlled the flow of glue.
  • These features are specially designed to ensure a consistently precise finish and superior quality and to avoid any poor quality and Inconsistency of glue.

PRESSURE ROLLER GROUP

  • A pressure roller group consists of 6 pressure rollers. The first pressure roller diameter is 150 mm and the remaining pressure roller diameters are 100 mm
  • Equipped with glue removig knife.
  • All 6 pressure roller pneumatically operated. pressure can be adjustable by pnumatic pressure Nobe. function of pneumatic cylinder operated by PLC.
  • On the glue table, all pressure roller are mounted 1 degree tilted to each other side . This ensures that the glue is evenly and firmly distributed in the centre of the panel. It also prevents access overflow of glue on the panel surface.
  • The pressure rollers apply sufficient force to the panel to ensure that the glue adheres correctly and in the desired amount.
  • It offers incredible results with a smooth finish and a long-lasting edge attached to the panel.
Heating Lamp

HEATING LAMP - 2

  • This function is used to remove moisture from the edge of thw panel.
  • Help to get perfect bonding during edge banding 

PRE-MELTING GLUE UNIT ( 2nd glue pot )

  • Glue is always be there in liquid from in upper pot.
  • It will pour the glue as per requirement.
  • Best for continuous production.
  • Cable sensor helps to maintain glue level in bottom pot.
  • It will refill the glue automaticallly by sensing the bottom pot.

PRESSURE ROLLER GROUP

  • A pressure roller group consists of 6 pressure rollers. The first pressure roller diameter is 150 mm and the remaining pressure roller diameters are 100 mm
  • Equipped with glue removig knife.
  • All 6 pressure roller pneumatically operated. pressure can be adjustable by pnumatic pressure Nobe. function of pneumatic cylinder operated by PLC.
  • On the glue table, all pressure roller are mounted 1 degree tilted to each other side . This ensures that the glue is evenly and firmly distributed in the centre of the panel. It also prevents access overflow of glue on the panel surface.
  • The pressure rollers apply sufficient force to the panel to ensure that the glue adheres correctly and in the desired amount.
  • It offers incredible results with a smooth finish and a long-lasting edge attached to the panel.

DOUBLE RAIL END CUTTING

  • Unit used to cut excess pvc from both the end of panel. Equipped with high frequency motors with a power of 0.55 kW and 12,000 rpm and saw blades with a diameter of 150 mm.
  • High reliability and precision as Installed large linear guides. 2 saw blades diam. 104 x 3.0 x 22 mm, T = 30.
  • This process ensures a precise edge finish for a perfect finished look.

ROUGH TOP/BOTTOM TRIMMING

  • Performs Rough trimming of the top and bottom edges of the glued edge.
  • Comes with 2 high end frequency motors with suction hood and front and vertical Guide Plate.
  • Motors manually tiltable between 2 working positions: Flush and radius trimming.
  • All spindles equipped with encoder readouts for fast adjustment
  • High Frequency spindle motor – 0.55 kw x 2, 200 hz , 12000 RPM

FINE TOP/BOTTOM TRIMMING

  • Performs fine trimming of the top and bottom edges of the glued edge.
  • Comes with 2 high end frequency motors with suction hood and front and vertical Guide Plate.
  • Motors manually tiltable between 2 working positions: Flush and radius trimming.
  • All spindles equipped with encoder readouts for fast adjustment
  • High Frequency spindle motor – 0.55 kw x 2, 200 hz , 12000 RPM

CORNER ROUNDING

  • corner rounding unit for front and rear edges for perfect corner trimming.
  • This unit works in different profile in prosessed post forming machine like half nose, full nose, and duck nose.
  • having a capacity of 50 mm panel.
  • High Frequency spindle motor – 0.55 kw x 2, 200 hz , 12000 RPM
  • Workpiece length min – 150 mm, edgebanding thickness upto 1mm to 3mm
  • Thanks to it’s movement of circulating over the edge of panel with the help of linear guide ways and pneumatic cylinder gives the best result in the corner of panel.

PVC SCRAPPING

  • PVC Scrapping does finishing work on edgebanding edges..
  • Comes with standard profile of 2 mm.
  • It provides better edge, consistency, precision and smoothness..
  • Includes 2 R-profile blades with suction hood and front and vertical guide plate..

GLUE SCRAPPING

  • The glue scraper helps remove excess adhesive from the joint surface of the panel and edgeband.
  • Flat blade knife with copying plate and air cleaning function
  • This process ensures that there is no glue on the panel or outside the application area,.

GROOVING UNIT

  • In built grooving function in machine gives easy working for make a groove on board
  • One can use maximum 9 mm grooving cutter.
  • This function is PLC controlled, so its very easy to operate.

LIQUID SPRAYING

  • Spraying anti adhesive liquid on panel before buffing unit give the clean finishing surface.
  • Equipped with PLC controlled pneumatic flow.
  • This process cleans the entire treated area to make it look rich and well-groomed..

FIRST BUFFING UNIT

  • Edge banding machine buff wheels are used to polish and buff the edges of the top/bottom wood panels to create a smooth and glossy finish.
  • which makes them sturdier and lasts a longer.
  • Finishing the edge looks dimensional and attractive with this process.

FIRST BUFFING UNIT

  • Edge banding machine buff wheels are used to polish and buff the edges of the top/bottom wood panels to create a smooth and glossy finish.
  • which makes them sturdier and lasts a longer.
  • Finishing the edge looks dimensional and attractive with this process.

SILICON BELT CONVEYER SYSTEM

  • For high speed machine silicon belt con veyer very helpfull for gripping on narrow panels is will not be allowed vibration of panel while performing operations o panels.
  • No suspension  on midle of the conveyer
  • Give the more stability & precise panel moment

TECHNICAL SPECIFICATION

Edge Bander Machine UEB 990 PUR

This panel saw machine is specifically built to conduct woodcutting with precision and attention to quality.

Technical Specifications

Note: Technical specifications may be changed without any prior notice. Product images are just for the reference.
Model UEB-990 PUR
Electric Level 415-220/50 hz
Edge Material Thickness 0.4-3 mm
Panel Thickness 10-60 mm
Minimum Width of The Panel 50 mm
Maximum Leangth of The Panel 120 mm
Converyer Speed 14/18/23 m/min
Conveyer Thickness Adjustment Electric
Conveyer Up/Down 0.37 kw
Total Electric Power 30 kw
Total Air Pressure 6-8 bars
Pre-milling Motor Power 2 x 2.2 kw
End Cutting Unit Power 2 x 0.55 kw
Top/bottom Fine-triming Unit Power 2 x 0.55 kw
Top/bottom Rough-triming Unit Power 2 x 0.55 kw
Corner Rounding Unit Power 2 x 0.3 kw
Grooving Unit Motor Power 4 Kw
Max. Depth of Grooving 17+9 mm blade
1st Buffing Unit (oscillated) Power 2 x 0.37 kw
2nd Buffing Unit Power 2 x 0.37 kw
Overall Size (L X H X W) 10400 X 1740 X 1000

Let's talk !

Please fill out this form and relax.
Our expert executive team will reach out to you and
offer the most suitable advice according to your needs.

Please contact we would like to help you.​

Please enable JavaScript in your browser to complete this form.
REQUIREMENTS
Note: Technical specifications may be changed without any prior notice. Product images are just for the reference.

Related to Products you've viewed

UEB 240 S

AUTOMATIC EDGEBANDING MACHINE

UEB 640 PCGD

AUTOMATIC EDGEBANDING MACHINE

UEB 310 c

AUTOMATIC EDGEBANDING MACHINE

UEB 860 PC

AUTOMATIC EDGEBANDING MACHINE

UEB 540 PC

AUTOMATIC EDGEBANDING MACHINE

860 PCGD

AUTOMATIC EDGEBANDING MACHINE

Explore Our Most Selling Machines

Scroll to Top