Shree Umiya F.Tech offers the Mox-Sabir make Automatic Edge Banding Machine expert 3600 to our admired clients. We are stressing to make available the machines with world-class technologies to meet with the rising demands of industries. These machines are built up using high grade raw stuff and designed innovatively. It is generally use to apply the laminated edge on various objects; this lamination would be 0.4 mm to 3 mm thick.

Expert 3600

Automatic Edge Banding Machine - Expert 3600

View Technical Specification

Silent Features

  • Systems that are used over years are patented to HAKİ SABIR
  • Double pallet system covered with rubber for gripping narrow and big parts
  • Pre Milling Unit(Jumping)
  • Plc controlled colored touch screen and touch screen setting application
  • Pre-Melting System
  • Step Motor Pvc Driver
  • Thin-thick pvc automatic pass
  • Automatic pricing, item counting and measurement of quantities
  • Thin-thick pvc automatic pass
  • Side press that does not apply pressure to patented front and rear overplus
  • Fast and easy setting and installation
  • Patented manufacture system, stabilized hard monobloc structure and high product quality
  • Patented cutting systems, minimized nonvibration operation
  • Wide pallet, interlaced chain
  • Nonproblematic equipment, machinery safety systems

Expert 3600 automatic edge banding machinery standard equipments

Control Systems

Controls of all operating units such as opening- end cutting, half concave milling, thin-thick pvc automatic pass, normal soft mdf, item counter, quantities meter, pricing are carried out over plc colored touch screen. High frequency motors are controlled by convertors and includes emergency switches. Electronic systems are lidded and sealed to protect from dust etc. environments.

Main Chassis

Double pallet system which is covered with rubber patented to HAKİ SABIR grips narrow and big parts.. It is the shortest machinery of all class produced for monobloc steel and measured accurately to provide maximum smoothness, right settings and exact contact to the ground.

Feeder

Designed in such a way that edge bandings shall be loaded from large scaled carrier bobbins.

Feeder and Overprinting

Rubber covered double pallet system comprises of polyamide and rubber pallets that are connected to jointed chains over accurate processed steel bed. Height adjustment and centering is carried out with manual lifting system.

Pre Milling Unit (JUMPING)

The system patented to HAKİ SABIR provides the proper process of two pieces ball blade; improperly cut slat, mdf, melamine coated chipboard with hopping, jointly and separate operational features.

Glue Spreading

Pre-Melting System It comprises of hot-melt glue melting and spreading and operating independent from pallet. For heat control, 2 pieces thermostat and 2 pieces steel cracker heated.

Rolling & Cutting

Step Motor Pvc Driver cutting & pulling system patent of which belongs to HAKİ SABIR, has the capacity of cutting the edge banding materials up to 10 mm thickness and 50 mm height. It does not require any adjustment in change over from thin material to thick material.

Pressing Rollers

The proximity switch and plc controlled pneumatic system patented to HAKİ SABIR comprises of 3 rollers. Being gripping drive, the initial pressing carries out printing settings automatically. This is the only machine that does not apply pressure to the overplus that are in front and rear part of the material to be glued.

Head & End Flat & Radius Cutting-Top Trimming Head & End Corner Trimming

The system patented to HAKİ SABIR, is start, end and upper processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

Bottom Trimming Head & End Corner Trimming

The system patented to HAKİ SABIR, is start, end and sub processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

Scraping Group

It is the only scraping unit which is patented to HAKİ SABIR, independent from each other, upper and lower radius, pneumatic and does not lead to blockage, by-pass. Can carry out automatic adjustment from 0.40 mm up to 2 mm.

Solvent Spraying

It sprays the liquid that is used for cleaning of glue and polishing of banding surface.

Polishing Group

It carries out the glazing and polishing the banding surface with the help of solvents, two separate 1500 d/min motors.

Grooving With Angled Jumping (Optional)

Sloped jumping input-output distance can be adjusted from plc colored touch screen. The diameter of saw is 80 X 4 mm (ops)

Safety Systems

The electro pneumatic accessories of the machinery carries out the automatic cleaning of oils during operational period; in the event that phases and air are not enough, machinery protects itself and prevents the damage to its systems. Part controls the feed interval and notify about the malfunction on the plc colored touch screen.